|
|
 |
 |
 |
66-1000
The Torsion key center is designed to
grab the "flat" of the torsion bar, not
the edges, greatly increasing the holding
strength. Includes mounting
tool adapter.
- Max Lift: 2.0"
- Max Tire Dia: 35"
|
66-3050
A heavy-duty shock extension
keeps the correct piston travel
on the stock shock. Forged Torsion
Key are 25% stronger than
the OEM cast Part.
- Max Lift: 2.5"
- Max Tire Dia: 33"
|
66-3000
Custom torsion key kit includes
shorter adjusting bolts. This will
prevent over-rotating the torsion
key. The kit may be dialed up with
the stock adjusting bolts, which
will affect ride quality.
- Max Lift: 2.5"
- Max Tire Dia: 33"
|
 |
 |
 |
 |
66-1020
ReadyLift has the only kit with a
custom A-arm bump stop for the
05-07 Ram 1500 4wd. This prevents
suspension damage during
extreme travel. NO CUTTING
NO SPRING COMPRESSOR
- Max Lift: 2.5"
- Max Tire Dia: 35"
|
66-5055
This part installs directly on top
of the strut assembly without
the use of a spring compressor.
Also lifts the FJ Cruiser and Pre-Runner. NO CUTTING NO
SPRING COMPRESSOR
- Max Lift: 2.25"
- Max Tire Dia: 32.5"
|
66-3080
Fits the "New Body" 2007 GM
6-Lug. Made in the USA!
Machined from solid Billet Aluminum
1.5" Lift. NO CUTTING
NO SPRING COMPRESSOR
- Max Lift: 1.5"
- Max Tire Dia: 32.5"
|
 |
 |
 |
 |
66-3025
ReadyLift is the only company that
uses steel fused with urethane. The
steel spring spacer will not deteriorate
or require realignment over time
while the urethane keeps the ride
smooth and quiet. Patent Applied.
NO CUTTING
- Max Lift: 2.0"
- Max Tire Dia: 32.5"
|
66-2090
Polyurethane donuts will keep
your factory ride smooth and
quiet. The kit allows for use of
up to 35" tire.
NO CUTTING
NO SPRING COMPRESSOR
- Max Lift: 2.5"
- Max Tire Dia: 37"
|
66-1090
This Spring Spacer uses powder-coated 7mm steel with
metric 10.9 rated mounting
studs. easy to install coil
spacer uses NO CUTTING
NO SPRING COMPRESSOR.
- Max Lift: 2.0"
- Max Tire Dia: 35"
|
Instructions by Part Number:
Right Click on the file and select, "Save As"
66-1000 |
66-1020 |
66-1080 |
66-1090
66-2000 |
66-2050 |
66-2090 |
66-3000
66-3025 |
66-3050 |
66-3070 |
66-3080
66-4000 |
66-5000 |
66-5050 |
66-5075
|
READYLIFT kits allow for the use of tires with heights ranging from 32" to 37" inches depending on application. We state it is the responsibility of the installer to
verify correct and safe fitments. We do not assume responsibility for any errors or misapplication contained within this guide. We recommend custom wheels no
wider than 8.5" - 9.0" with a minimum of 4.5" of backspacing on most applications. Using wheels wider than 8.5" may require a larger backspacing or a reduced tire
height to reduce the chance of tire to fender clearance problems on some applications. In order to install the maximum tire size it may require retaining the factory
back spacing and wheel width. Some applications may require some slight inside front fender well shrouding modifications. |
