Clean your AIRAID filter
|
Restore your full airflow efficiency
|
Maintain optimum engine performance
|
- Gently shake off and brush away excess dirt.
- Spray on AirAid Cleaning Solution so that the filter is fully saturated, and
let soak for 10 minutes.
- Rinse filter from
the clean side to the dirty side until water comes through clear. Use only low pressure from a tap or hose.
|
- Allow filter to dry. A fan may be used to speed process.
- DO NOT use heated air blowers, compressed air, or open flame.
|
- Make one careful application of AirAid® Performance Oil to each filter pleat.
- Allow oil to seep into filter for 20 minutes.
- Re-oil any areas that still appear dry.
- Do not over oil.
|
Always APPLY LABEL
(Included with the Filter Tune-up Kit)
Affix "Do Not Discard"
label to filter case .
|
|
|
Maintenance Tips
|
CLEAN:
Clean your AirAid® filter every 30,000 to 50,000 miles for normal driving, and more
often for off-road and heavy dust conditions.
CHECK YEARLY:
If your annual mileage is low,
check filter once a year to
see if oiling is needed.USE ONLY AIRAID
CLEANING SOLUTION:
Use only AirAid® Cleaning Solution to clean your AirAid® filter. Never use gasoline, detergents, steam cleaning
or parts solvent.
OIL AFTER CLEANING:
Your AirAid Premium Filter is pre-oiled and ready to use out of the package. Always oil your AirAid Premium Filter after each cleaning. Use only AirAid Filter Performance Oil. No transmission fluid, motor oil, diesel fuel, or light weight oils.
DO NOT OVER OIL!
|
|
